ID Type Name Description Links Access
Cabinet-MIB-1 comment comment
Header
Cabinet-MIB-2 mib DEFINITIONS 
MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY
                                                    FROM SNMPv2-SMI
                                                      -- RFC 2578
MODULE-COMPLIANCE, OBJECT-GROUP
                                                    FROM SNMPv2-CONF
                                                      -- RFC 2580
ITSLatitude84, ITSLongitude84, ITSElevationMetres
                                                    FROM ISO26048-1-FieldDevice
fdGlobalMIB, fdGlobalConformance
                                                    FROM ISO26048-1-Global
Cabinet-MIB-3 module-identity fdCabinetMIB

The MIB that defines basic information that is generic to most field device cabinets. Copyright (C) International Organization for Standardization (ISO). This MIB module is part of ISO 26048-1; see ISO 26048-1 for full legal notices.
Cabinet-MIB-4 comment comment
Cabinet Objects
Cabinet-MIB-5 object-type fdCabinetLatitude

1 Cabinet latitude

The latitude of the cabinet in which the field device controller resides, per WGS-84 datum.
Satisfies:
26048_1-1083 Set the cabinet's location
26048_1-1084 Determine the cabinet's location
 read-only
Cabinet-MIB-6 object-type fdCabinetLongitude

2 Cabinet longitude

The longitude of the cabinet in which the field device controller resides, per WGS-84 datum.
Satisfies:
26048_1-1083 Set the cabinet's location
26048_1-1084 Determine the cabinet's location
 read-only
Cabinet-MIB-7 object-type fdCabinetElevation

3 Cabinet elevation

The elevation of the base of the cabinet in which the field device resides.
Satisfies:
26048_1-1083 Set the cabinet's location
26048_1-1084 Determine the cabinet's location
 read-only
Cabinet-MIB-8 object-type fdCabinetPowerSource

4 Cabinet power source

The most significant source of power currently being used within the cabinet. unknown - The system is unable to determine the power source at present (this is considered an error state) other - A source other than the standardized sources mainLine - mains power from the main power lines battery - Battery designed for primary use generator - Power from a fueled generator solar - Power from solar energy conversion wind - Power from wind energy conversion ups - Power from a battery designed for backup use only If the power is provided by a hybrid source (e.g., batteries connected to solar panels) the value of this object will report the source providing the greatest net power. Thus, if solar panels are currently generating 30 watts and the cabinet is consuming 50 watts, this object shall report 'solar'.
Satisfies:
26048_1-350 Retrieve power source
 read-only
Cabinet-MIB-9 comment comment
Conformance Information
Cabinet-MIB-10 object-identity fdCabinetConformance

A node defining conformance information related to the field device cabinet objects.
Cabinet-MIB-11 object-identity fdCabinetCompliances

A node for compliance statements for the cabinet objects.
Cabinet-MIB-12 object-identity fdCabinetGroups

A node for group definitions related to cabinet objects.
Cabinet-MIB-13 module-compliance fdCabinetComplianceV1

The conformance statement for cabinet objects.
Cabinet-MIB-14 object-group fdCabinetLocationGroupV1

The objects necessary for locating the cabinet.
Cabinet-MIB-15 object-group fdPowerSourceGroupV1

The objects necessary for determining the power source for the cabinet.
Cabinet-MIB-16 end end

Get in touch

Phasellus convallis elit id ullamcorper pulvinar. Duis aliquam turpis mauris, eu ultricies erat malesuada quis. Aliquam dapibus, lacus eget hendrerit bibendum, urna est aliquam sem, sit amet imperdiet est velit quis lorem.